Pedal Pusher
Dual mono Console/DAW to Guitar Pedal Interface
Downloads:
Pedal Pusher is designed to incorporate guitar pedal effects into your console or workstation. It has two effect loop channels and also includes six high quality isolated power supplies for powering your pedals.
Availability: Stock - two weeks
Pay via PayPal
Overview
- Dual Mono Pedal loop channels. Each channel features:
- High headroom line level balanced input to efx pedal send with impedance and level matching.
- High impedance guitar pedal return to high headroom line level balanced output.
- Selectable pickup simulation, Active or Passive.
- High frequency equalizer in the passive position to simulate or negate the effect of guitar cable.
- Low noise universal power supply built in, no wall wart!
- Six isolated, high current power supplies with four selectable voltages for low noise pedal power.
- Pedal Returns can also function as high quality, dual mono or stereo, high impedance, direct instrument inputs (DI) with line level outputs. Each return has two gain settings.
- The Pedal Sends can function as high quality sends from a console/DAW to guitar amp for re-amp use.
- Routing switches add flexibility for feeding both loops from one input or both outputs from one Pedal return. For example: feed two different pedal loops from a single line input or feed a clean and effected signal to the console from a guitar input.
- DANTE option allow connection to Dante network at sample rates up to 96k. Outputs are mirrored at analog outputs. Inputs are selectable from Dante or analog.
Specifications
Line Inputs:
Nominal Level : +4dBu
Maximum Input level: +24dBu
Impedance: 48kΩ differential
Line Outputs:
Nominal Level : +4dBu
Maximum Balanced Output level: +27.5dBm into 600Ω
Maximum UnBalanced Output level: +22dBm into 600Ω
Frequency Response:
20Hz to 20kHz +0.01dB,-0.11dB
Noise level:
-101.3 dBa
Distortion:
THD: .00114%
IMD: .00278%
Power:
Voltage Range: 80-246vac
Frequency Range: 47-63Hz
A/C Current:1.5A @115VAC
Isolated DC Supplies:
Isolated DC Supplies: 500ma@9V (x6 supplies)
voltages available: 9v, 12v, 18v, 24v
Dimensions:
width: 375mm , height: 42mm, depth: 100mm
width: 14.75", height: 1.75", depth: 4"
Dante Option:
Sample Rates: All standard up to 96k
Ports: 2 (to function as daisy chain)
Outputs: Dante and analog simultaneously
Inputs: Dante or analog switchable
Pedal Pusher in the wild!
Connection Diagrams
Here are some suggested connection diagrams for the Pedal Pusher.
